If you have recently purchased herringbone flooring, you may be wondering how to lay it. This type of flooring comes in different varieties with unique instructions for installation. The first step in laying herringbone flooring is to measure the area you wish to cover. This pattern is more difficult to install than other types because the wood used has minimal variation in colour and grain. To make sure that you have enough room for each board, open three packages of the same size and mix the shade and grain pattern.
When laying herringbone flooring, it is important to follow the correct measurements for each slat. If you make an error in measuring, you will end up with a disorganized floor. The length of each slat must be a multiple of its width, and each slat must have a tongue on one end to fit together. If you use a basic screed, you may have to wait several months for the floor to dry. If you’re laying your herringbone floor yourself, you can try the click method. This method does not require screws or nails, and it allows you to fit the planks together in a jigsaw pattern.
Next, measure the room. You’ll need to measure every inch of the floor to get a clear picture of where you want each slat to go. Use a tape measure or a chalk line to measure the length of each slat. Then, cut the herringbone flooring pieces so that they line up with the lines you’ve drawn. Now that you’ve measured the room, it’s time to lay your herringbone flooring.
Herringbone flooring looks best in larger rooms, where you can see the pattern. This type of floor is great for foyers, as well. It’s great for making a statement in a room. If you’re looking for a floor design that’s eye-catching and durable, consider herringbone. Look at the images below for some inspiration. Before installing your herringbone floor, make sure you read the instructions thoroughly. If you fail to follow them, you may end up voiding your warranty.
Glue-down herringbone flooring is much more complicated than tap-down flooring. A professional is better suited to this type of floor installation. Glue-down herringbone flooring is constructed with a four-sided click system to fit boards together seamlessly. A herringbone floor should be laid over a timber subfloor. For more detailed instructions, hire a professional. You can choose between A or B boards, and slot the short side of one into the long side of the next board at an angle.
Before laying herringbone flooring, you should ensure that your subfloor is in good condition. If you’re replacing an existing concrete subfloor, make sure it’s free of bitumen and adhesive. You can also use a self-levelling compound if your concrete subfloor is not level. The moisture content of the subfloor must not be higher than 35% R.H. In addition to using a self-levelling compound, you can also apply a liquid Damp Proof Membrane to prevent excess moisture from damaging your new hardwood herringbone flooring.
If you’re looking for a more modern look, you can choose the chevron pattern instead. Instead of the zigzag pattern, chevrons are made up of a series of rectangular pieces set at an angle. They’re easier to install and will create a geometric feel in your room. In high-end homes, this pattern is a popular choice. The pattern is also popular with modern-styled homes.
Because of the herringbone’s visual impact, it’s crucial to carefully align the central V pattern to the sightlines of your room. This could be the main entry doorway, an ornamental light fitting, a bay window, or a feature fireplace. Depending on the room, this pattern may vary slightly but the end result will set the tone for the room. For instance, if you’re installing herringbone in a foyer, the placement of the central V should be in the middle of the room, so that it’s a visual focal point for the whole space.
The second step in laying herringbone is to determine the spacing between each board. You can use a chalk or glue line to measure this distance, but the braided fish line will give you better results. The chalk line will leave wider marks than a braided fish line. If you’re installing 12-inch flooring, you should use two nails per board. You should check that each slat is square to avoid slats pushing out of line.
